Car Carrier

Standard Chassis Features

• Ram 6.7L Diesel Engine – 360hp
  • 800 lbs. ft. Torque
  • Exhaust Break
  • Electronically Controlled Engine
  • 4 Wheel disc Brakes
• 6-Speed Automatic Transmission 
• Four Wheel Drive
  • Electronic Shift Transfer Case
  • Limited Slip Differential
  • 4.44 Gear Ratio
• 19,500 Lbs. GVWR
  • 7,000lb. Front Axle
  • 13,500lb Rear Axle
• 17 GPM clutch pump kit
• 22 Gallon Fuel Tank
• Polished Forged Aluminum Wheels
  • All-Season Front and Traction Rear Tires. Tire Size – 225/70R19.5
• 80-AMP Circuit Breaker
• Daytime Running Lights
• Dual Air Bags
• Sirius XM AM/FM/Satellite Radio with Blue Tooth Streaming audio
• Steering Wheel Controls
• Warranty
  • Basic Chassis  – 36 month / 36,000 miles
  • Powertrain – 60 month / 60,000 mil

(Note) Chassis and Tow Body, equipment along with other vendor supplied items / specifications are subject to change without notice. For the most accurate Specifications please see actual quote.

Standard Body Features

Towing Unit Specifications:

• Chevron – Aluminum – Series 10 Roll Back Car Carrier
  • 19 ft 5” Car Carrier Roll Back Body
  • 10,000 LB Deck Rating
  • 3,000 lb wheel lift rating
  • (12) Chain Locks
  • (4) Rear Safety Chains
  • 8,000LB worm gear winch
  • Winchline Tensioner with Roller Guide Fairlead
  • 50ft of 3/8” Winchline
  • Mechanical “Anti-Tilt” Prevents Bed from being tilted when in bed locks
  • Dual Bed Controls “Each Side” Of Car Carrier
  • L.E.D. Illuminated Controls
  • Removable Bed Rails ** IWS Added Option
  • (2) Safety Straps and Ratchets
  • IWS Sales Mud Flaps (Pair)
  • Hose Track Snow Scoop

Standard Toolboxes Features

• Tool Box (Driver Side)
  • In the Ditch Pro Series 70” Aluminum Tool Box ** IWS Added Option
  • Tool Box Doors have a 400lb Load Rating (Designed to Stand On)
  • Full Length Shelf in Tool Box ** IWS Added Option
  • Tool Box Shelf Dividers “Upper and Lower” ** IWS Added Option
  • Dry Deck Mating Installed Inside Tool Box and Box Top ** IWS Added Option
  • In the Ditch Box Top (With Dividers) ** IWS Added Option
  • (3) Galvanized “Corrosion Resistant” Tool Box Mounts
  • Learn More about This Tool Box https://www.youtube.com/watch?v=4k3L4q_CzKg

• Tool Box (Passenger Side)
  • In the Ditch Pro Series 70” Aluminum Tool Box ** IWS Added Option
  • Tool Box Doors have a 400lb Load Rating (Designed to Stand On)
  • Half Length Shelf in Tool Box ** IWS Added Option
  • In the Ditch Jack Mount in Tool Box ** IWS Added Option
  • 2 ½ Ton Hybrid Racing Floor Jack ** IWS Added Option
  • Tool Box Shelf Dividers “Upper and Lower” ** IWS Added Option
  • In the Ditch Box Top (No Dividers) ** IWS Added Option
  • (36) Dry Deck Mating Installed Inside Tool Box and Box Top ** IWS Added Option
  • (3) Galvanized “Corrosion Resistant” Tool Box Mounts** IWS Added Option
  • Air Fitting ** IWS Added Option
  • Shackle Rack ** IWS Added Option
  • Lug Wrench Bracket with Lug Wrenches** IWS Added Option

Standard Lighting Features

• (2) Round 15 LED Work Light with Black Housing 675 Lumens 12/24VD(.5LBS) To Be Installed Left and Right of Deck Winch
• (2) Round 15 LED Work Light with Black Housing 675 Lumens 12/24VD(.5LBS) To Be Installed on Tailboard as lower work
• (2) Round 15 LED Work Light with Black Housing 675 Lumens 12/24VD(.5LBS) To Be Installed to be installed under lightbar as
  upper work lights
• (2) 36′ LED Strip Light inside Tool Box
• DMSK5000 Strobe Marker Kit
• LED Magnetic Tow Light (6LBS)

Standard Cab Protector Features

• Bed Mounted Cab Protector 
• 60″ Ecco Lightbar with Work / Stop / Tail / Turn Lights and Controller